- Products / Store
- >
- CubeSat Kitâ„¢ Modules
- >
- Motherboard Module (MBM)
Motherboard Module (MBM)
SKU:
$1,575.00
$1,575.00
Unavailable
per item
The Motherboard Module (MBM) is part of the CubeSat Kitâ„¢ nanosatellite architecture. This is flight hardware (blue). By adding a Pluggable Processor Module (PPM) to the MBM, you create a low-power, 8- or 16-bit MCU/DSC C&DH module for your CubeSat. An MBM + PPM occupies a standard 0.600" (15.24mm) tall module slot, typically at the base of a Pumpkin CubeSat Kitâ„¢ structure. The MBM routes the MCU/DSC's I/O pins to the 104-pin CubeSat Kit bus, and provides an RBF switch, an external +5Vdc power input, a USB device port, a battery-backed RTC subsystem, an SPI-interface SD Card, an extra power header, and +5V and GND for use by PC/104 connectors.
​Flight Hardware | Flight Qualified | Space Proven
​Flight Hardware | Flight Qualified | Space Proven
Purchasing restrictions apply (see below). |
-
Information
-
Compatibility
-
CAD
-
Documents
-
Restrictions
<
>
Includes one complete MotherBoard Module. The RBF switch is mounted, but not wired to anything. No SD Card or RTC backup battery (BR1225 size) are included.
The non-stackthrough version is intended to be mounted on a CubeSat Kit Base Plate Assembly at one end of a CubeSat; the Base Plate Assembly's metal provides the guide tube for the RBF pin, and other features. For other locations, utilize the stackthrough version, along with the RBF Bracket Kit.
The non-stackthrough version is intended to be mounted on a CubeSat Kit Base Plate Assembly at one end of a CubeSat; the Base Plate Assembly's metal provides the guide tube for the RBF pin, and other features. For other locations, utilize the stackthrough version, along with the RBF Bracket Kit.
This module is compatible with all CubeSats that conform to the CubeSat Kit Bus standard with its 104-pin connector.
The MotherBoard Module is compatible with:
The MotherBoard Module is compatible with:
- Pluggable Processor Module (PPM) A1
- Pluggable Processor Module (PPM) A2
- Pluggable Processor Module (PPM) A3
- Pluggable Processor Module (PPM) B1
- Pluggable Processor Module (PPM) D1
- Pluggable Processor Module (PPM) D2
- Pluggable Processor Module (PPM) E1
- Base Plate Assembly
- Base Plate Assembly for Ants Antenna
- Chassis Walls
- CubeSat Kit Pro Chassis Walls
- RBF Bracket Kit
- RBF Pin & Lanyard
Revision E
Motherboard Module Stackthrough
|
|
Motherboard Module Non-Stackthrough
|
|
Revision D
Motherboard Module Stackthrough
|
|
Motherboard Module Non-Stackthrough
|
|
Motherboard Module Rev E |
|
Motherboard Module Rev D |
|
Instructions for USB use in Windows 10 |
|
Configuration file for Windows 10 |
|
The MBM is available only to customers who have already purchased a CubeSat Kit; proof of a prior CubeSat Kit purchase is required. That's because the supplemental information (e.g., schematics) and software required to use the MBM are only included in the purchase of a full CubeSat Kit.
WARNING: Pumpkin products can expose you to chemicals, including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|