Remove-Before-Flight (RBF) Bracket Kit
SKU:
711-00330
$165.00
$165.00
per item
Precision constructed from Al 5052-H32 and plated according to the CubeSat Design Specification (CDS), this bracket is used in CubeSat Kit™ structures that utilize the Chassis Walls of 1.5U, 2U and 3U size and locate the Motherboard Module (MBM) in a location other than on the Base Plate Assembly, at a location "higher up" in the chassis. The RBF Bracket is attached to the MBM via the screws that hold the RBF switch in place. It guides the RBF pin into place, and provides physical support to the external power connector and USB device connector. The RBF bracket is then secured to the Chassis Walls via two external M3 screws, after all of the CubeSat Kit™'s structural elements have been connected.
Remove-Before-Flight-Bracket Kit |
|