CubeSat Kit for Microchip dsPIC33 DSCs
SKU:
$9,855.00
$9,855.00 - $11,500.00
per item
This CubeSat Kit includes hardware solutions (structure, C&DH module with mass storage capability, RBF and Separation switches), software tools (RTOS, library, flash file system), development tools (programmer/debugger) and documentation. The electronics and software are based on the Microchip® dsPIC33FJ256GB210 low-power 16-bit DSC. You can choose between different structure sizes, and solid-wall or skeletonized construction.
Development Hardware | Prototyping Hardware | Development Software | Flight Hardware | Flight Qualified | Space Proven
Development Hardware | Prototyping Hardware | Development Software | Flight Hardware | Flight Qualified | Space Proven
This CubeSat Kit includes these processor-independent components:
- A complete CubeSat mechanical structure (i.e., the chassis), consisting of a Base Plate Assembly, a Chassis Wall Assembly (in different lengths) and a Cover Plate Assembly. Each kit contains either skeletonized or solid-wall versions of these assemblies.
- CubeSat Kit Development Board (DB) for in-lab development, debugging and testing
- CubeSat Kit Motherboard Module (MBM) for use inside the CubeSat Kit structure
- Protoboard Module Kit for simple through-hole component prototyping
- Remove-Before-Flight Pin and lanyard
- External universal +5Vdc 4A switching power supply
- External universal 6-12Vdc switching power supply
- 615-00364 USB cable
- 618-00404: 9/64" Allen wrench
- 618-00377: 1/4" offset wrench
- 618-00403: Phillips #1 screwdriver
- Miscellaneous fasteners / mounting hardware
- Pluggable Socketed Processor Module D (PSPM D) with dsPIC33FJ256GP710
- Pluggable Processor Module D2 (PPM D2)
- JFPC-PIC24 Programming Adapter
- Microchip® MPLAB-ICD3 USB In-Circuit Debugger
- Salvo Pro for PIC24 MCUs and dsPIC DSCs
- dsPIC33 CubeSat Kit Software
- HCC-Embedded dsPIC33 EFFS-THIN SD Card Library for the CubeSat Kit
This CubeSat Kit is compatible with the following free software packages from Microchip®: Important Note: This CubeSat Kit is compatible with particular releases of the MPLAB X IDE and XC16 C compiler. Currently supported versions are listed in the CubeSat Kit /PIC24 download area. Versions other than the ones listed may not be supported.
Every CubeSat Kit is compatible with a wide range of structural and electrical components, including but not limited to:
Every CubeSat Kit is compatible with a wide range of structural and electrical components, including but not limited to:
Please refer to the individual CubeSat Kit components for CAD models (where applicable).
|
WARNING: Pumpkin products can expose you to chemicals, including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|