I/O LED Module
SKU:
710-00521
$360.00
$360.00
per item
The Linear EPS Module displays the status of all 48 I/O lines (IO.[47..0]) on a CubeSat Kit Bus Connector. It is very useful for at-a-glance visual monitoring of a CubeSat's I/O signals. Every I/O signal is buffered, and an ON/OFF switch is provided to disable the LEDs and zero the current draw of the module. Through-hole test points are provided for each I/O signal next to each LED.
Development Hardware
Development Hardware
Includes a fully assembled I/O LED Module.
LEDs represent the active HIGH state of an I/O signal. The quiescent current when the switch is OFF is essentially zero.
LEDs represent the active HIGH state of an I/O signal. The quiescent current when the switch is OFF is essentially zero.
This module is compatible with all CubeSats that conform to the CubeSat Kit Bus standard with its 104-pin connector
IO LED Module (Test Board A) |
|
IO LED Module (Test Board A) |
|
|
WARNING: Pumpkin products can expose you to chemicals, including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|