The BM2 intelligent battery module includes an active battery balancer that automatically seeks to equalize the voltages of all two (2S4P) or four (4S2P) cell groups in the BM2's total of eight 18650-size Lithium-Ion cells. The balancer is active when the battery is charging and when the charge current has dropped below a prescribed limit.

Most Li-Ion batteries cannot be charged at temperatures below 0ºC, and the BM2's LG MJ1 cells are no exception. The BM2 cell heaters for this cell chemistry automatically enables the heater at 5ºC as the temperature drops and disables it once the temperature rises to 7ºC.

As part of low-temperature testing being performed at Pumpkin, a neat telemetry capture came up this evening. The thermal chamber is set to -5ºC, the BM2's heater was in the default AUTO mode, and the charging current into the BM2 was limited to 1A to simulate a wimpy charger. The cell heaters consume around 8W; battery energy is 100Wh.

As the heaters turn on and off,  the current flowing into the cells decreases and increases, respectively (because charge + heater current is limited to 1A). Each time the charge current increases, the cell voltage increase with it, but individually. The telemetry capture shows the four individual cell voltages as the BM2 approaches its final pack voltage. You can see the active cell balancing in cell 2 (the purple trace): it started out around 20mV higher than cell 4 (the yellow trace), but within 45 minutes of all of the cells charging, these two cell voltages have converged. All four cell voltages will converge further as the BM2 continues operating like this. The cell balancing is slow but effective; we typically see mismatches of under 5mV across four cells, when the balancing algorithm is allowed to run its course.

The cell balancing, cell heaters and real-time telemetry (and nearly 100 other data points) are available to all BM2 users as standard features of each BM2.

After over 13 years of holding prices constant, inflation and the global supply chain (GSC) crisis have finally forced Pumpkin's hand. Chips that were easily available in 2019 for $4 are now costing $65, if you can find them. So it was with great reluctance that we raised our prices today.

We will honor the older pricing until May 31 for those customers who have received quotes or contacted us with pricing between Jan. 1 and April 8. For all other customers, the new pricing takes effect immediately.

Did you know that Pumpkin also develops and sells a unique RTOS that is targeted for MCUs with small memory footprints? All of Pumpkin Space's microcontroller-based modules utilize a Microchip PIC24E MCU, with Salvo as the foundational RTOS. In these applications, Salvo enables event-driven, priority-based tasks to run on the MCU in a highly decoupled manner.

Pumpkin is not the only Salvo RTOS user -- today we received an email from a company whose products you are likely to see when visiting a large world-wide fast food chain:

Salvo is still great, in no uncertain terms, for our application on dsPIC it's been a God-send. We build 40,000 dsPIC33
boards a year, and at present 35,000 ship with Salvo running on them. Harold F.

While there is a learning curve associated with learning an RTOS, once learned, the benefits of the structure that the RTOS brings to an application are substantial. And a carefully-crafted RTOS like Salvo can easily be configured to have  zero impact (yes, zero!) on the real-time responsiveness of the application.

In 2009-2011, Pumpkin developed and delivered a series of twelve 3U-sized CubeSats to the National Reconnaissance Office (NRO) -- these were the Colony I buses. These 3U CubeSat-size buses had fixed and deployable panels, a full 3-axis ADACS with coarse sun sensors and a magnetometer, an 8051-based C&DH processor, multiple batteries and over 1000cc of payload volume. The NRO distributed Colony I buses to various organizations ranging from the Naval Research Lab (NRL, with their QbXI & QbXII CubeSats) to USC's ISI, with its Aeneas CubeSat. 

Sometime in the not-too-distant future, one of thousands of Pumpkin SUPERNOVAs is likely to fall back to Earth. Some time will pass, and someone will find it, in a field, resting, its payload long gone, and yet seemingly unscathed due to its robust construction.

Almost unscathed -- if you look closely, one of the SAP cover screws (made from 18-8 SST) burned up on rentry, and the -ZA1 SAP cover has worked itself loose ...